Rebar Weight & Quantity Calculator
Estimate reinforcing steel linear feet and weight in pounds and tons. Add laps and hooks, check slab areas, then send your numbers with a quote request.
Free Rebar Calculator for Tucson Contractors
Use Part A for bars you measure in linear feet, such as footings, columns and stirrups. Use Part B for slabs and foundations when you know the area or the dimensions and the bar spacing. Results update as you type.
1. Enter your bars
Type a location, length, quantity and bar size for each line.
2. Add laps and hooks
Choose a lap method and enter hook counts only when your drawings call for them.
3. Review and request
Check the totals, print or export them, and send them with your quote request.
Rebar Calculator
Accept the Terms of Use to Use the Calculator
Please read the Terms of Use below. The calculator unlocks after you accept them.
Rebar Calculator Terms of Use, effective November 9, 2026
Tucson Reinforcing Steel Rebar Calculator Terms of Use
Effective Date: November 9, 2026
1. Acceptance of Terms
Welcome to the Tucson Reinforcing Steel Rebar Calculator (the "Calculator"), available through tucsonreinforcingsteel.com (the "Website").
By accessing or using the Calculator, you acknowledge that you have read and agree to these Terms of Use. If you do not agree, you should discontinue use of the Calculator.
These Terms govern use of the Calculator and its associated content, features, calculations, downloadable reports, and related services.
2. Authorized Personal and Commercial Use
Tucson Reinforcing Steel ("TRS," "we," "us," or "our") grants users a limited, nonexclusive, nontransferable, revocable license to access and use the Calculator for lawful personal and commercial purposes.
Authorized commercial use expressly includes:
- Preparing preliminary reinforcing steel quantity and weight estimates.
- Evaluating reinforcing steel requirements for commercial, residential, industrial, and infrastructure construction projects.
- Preparing internal construction estimates, budgets, proposals, and bid documents.
- Printing, downloading, and sharing calculation results with customers, contractors, suppliers, engineers, and other project participants.
- Using calculated results to request reinforcing steel quotations.
Users may incorporate their own calculation results into commercial estimates, reports, and project documentation.
However, authorization to use the Calculator does not grant ownership of, or permission to reproduce, distribute, sublicense, or commercially exploit, the underlying Calculator software, source code, proprietary graphics, or other protected Website materials.
3. Intellectual Property Rights
The Calculator, including its original software code, interface design, graphics, written content, and associated materials, is protected by applicable intellectual property laws to the extent such materials qualify for protection.
All rights in TRS-owned materials are reserved.
Except as expressly authorized, users may not:
- Copy, reproduce, republish, or redistribute the Calculator software or substantial portions of protected Website content.
- Sell, sublicense, lease, or commercially distribute the Calculator as a standalone software product or competing online service.
- Remove or alter copyright notices, trademarks, or proprietary identification.
- Use TRS trademarks or branding without authorization.
- Attempt unauthorized access to restricted systems or interfere with the Calculator's operation.
These restrictions do not prohibit activities expressly permitted by applicable law.
Standard mathematical formulas, public-domain information, and independently developed calculation methods are not claimed as exclusive proprietary property of TRS.
4. Calculator Accuracy and Limitations
The Calculator is provided as a convenience for preliminary reinforcing steel estimating.
Although reasonable efforts may be made to maintain accurate calculations, TRS does not warrant or guarantee that calculated results are complete, error-free, or suitable for any particular construction project.
Actual reinforcing steel requirements may vary due to:
- Rebar dimensions, grades, and manufacturing tolerances.
- Lap splice lengths and development requirements.
- Hook dimensions, bending requirements, and fabrication tolerances.
- Reinforcement spacing, concrete cover, and structural configurations.
- Material waste, cutting allowances, and construction conditions.
- Project-specific drawings, engineering specifications, and applicable building codes.
- User input errors or incorrect assumptions.
All calculated results must be independently verified before being relied upon for material purchasing, fabrication, installation, or construction decisions.
5. No Engineering or Professional Design Services
The Calculator is an estimating tool and does not provide professional engineering, structural design, architectural, or construction consulting services.
Use of the Calculator does not establish an engineer-client, architect-client, contractor-client, or other professional relationship.
Calculator results do not replace approved structural drawings, professional engineering judgment, project specifications, or applicable construction standards.
Users are responsible for consulting appropriately qualified professionals when required.
6. User Responsibilities
Users agree to:
- Enter accurate and complete project information.
- Verify calculated quantities and results.
- Confirm applicable reinforcement requirements.
- Review relevant project specifications and approved construction documents.
- Exercise independent professional judgment.
- Use the Calculator only for lawful purposes.
TRS is not responsible for inaccuracies resulting from incorrect user inputs, inappropriate assumptions, or reliance on estimates without independent verification.
7. Downloading, Printing, and Sharing Results
Users may download, print, retain, and distribute their own Calculator-generated results for legitimate personal and commercial purposes.
Such authorization includes sharing results with project owners, contractors, engineers, suppliers, and other construction professionals.
Users may not falsely represent that TRS has independently reviewed, approved, certified, or guaranteed those results.
Downloading or sharing calculation results does not transfer ownership of the Calculator software or other protected Website materials.
8. Requests for Quotations
The Calculator may provide functionality allowing users to submit calculated quantities and project information for quotation purposes.
Submission of a quotation request does not constitute acceptance of an order, a binding contract, or a guarantee of material availability, pricing, or delivery.
Any quotation issued by TRS is subject to its stated conditions and applicable agreements.
TRS reserves the right to verify quantities, specifications, pricing, and project requirements before issuing or accepting a quotation.
9. User-Submitted Information and Documents
Users may voluntarily submit project information, calculations, drawings, specifications, and contact information through the Website.
Users represent that they have the necessary rights or authorization to submit such materials.
Users retain ownership of their submitted materials.
By submitting information, users grant TRS a limited, nonexclusive permission to receive, store, review, reproduce internally, and use the submitted materials as reasonably necessary to respond to inquiries, prepare quotations, and provide requested services.
TRS does not acquire ownership of user-submitted construction drawings or project documents merely because they are uploaded.
Personal information will be handled in accordance with the Website's applicable Privacy Policy.
10. Disclaimer of Warranties
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE CALCULATOR AND ASSOCIATED MATERIALS ARE PROVIDED "AS IS" AND "AS AVAILABLE," WITHOUT WARRANTIES OF ANY KIND, WHETHER EXPRESS OR IMPLIED.
TRS disclaims, to the extent permitted by law, implied warranties of merchantability, fitness for a particular purpose, and non-infringement.
TRS does not warrant that the Calculator will operate without interruption, that defects will be corrected, or that results will satisfy the requirements of any particular construction project.
Nothing in these Terms excludes warranties or rights that cannot lawfully be excluded.
11. Limitation of Liability
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, TRS AND ITS OWNERS, OFFICERS, EMPLOYEES, CONTRACTORS, AND SERVICE PROVIDERS SHALL NOT BE LIABLE FOR INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES ARISING FROM USE OF OR INABILITY TO USE THE CALCULATOR.
Such damages may include, without limitation:
- Lost profits or business opportunities.
- Construction delays.
- Material ordering errors.
- Fabrication or installation errors.
- Project cost overruns.
- Business interruption.
- Loss of data.
This limitation applies regardless of the legal theory asserted, to the extent permitted by applicable law.
Nothing in these Terms limits liability that cannot lawfully be excluded or restricted.
12. Indemnification
To the extent permitted by applicable law, users agree to indemnify and hold harmless TRS and its representatives from third-party claims, losses, damages, liabilities, and reasonable expenses arising from the user's unlawful use of the Calculator, infringement of third-party rights, or material violation of these Terms.
This provision does not require users to indemnify TRS for its own negligence, misconduct, or other liability where such indemnification is prohibited by law.
13. Availability and Modifications
TRS may update, modify, suspend, or discontinue the Calculator or any of its features at any time.
TRS does not guarantee continuous availability of the Calculator or permanent retention of user-entered calculations.
Users are encouraged to retain copies of important project estimates.
14. Termination of Access
TRS may suspend or terminate access to the Calculator where reasonably necessary to address violations of these Terms, unlawful activity, security threats, or misuse of the Website.
Termination does not affect a user's ownership of independently created project information or previously generated calculation results.
15. Governing Law
These Terms shall be governed by the laws of the State of Arizona, United States, without regard to conflict-of-law principles, except where applicable law requires otherwise.
Subject to mandatory jurisdictional requirements, disputes arising under these Terms shall be brought before courts of competent jurisdiction in Arizona.
16. Severability
If any provision of these Terms is determined to be invalid or unenforceable, that provision shall be enforced to the maximum extent permitted by law, and the remaining provisions shall remain in effect.
17. Changes to These Terms
TRS may revise these Terms periodically.
Updated Terms will be posted on the Website with a revised effective date.
Material changes will be communicated where required by applicable law. Changes will apply prospectively unless otherwise lawfully agreed.
Continued use of the Calculator after revised Terms become effective constitutes acceptance to the extent permitted by applicable law.
18. Ownership and Business Transfers
TRS may transfer its rights and obligations under these Terms in connection with a lawful sale, merger, reorganization, or transfer of the Website or associated business assets.
Any transfer involving personal information or confidential project documents must comply with applicable law, the Privacy Policy, and relevant contractual obligations.
19. Contact Information
Questions concerning these Terms may be directed to Tucson Reinforcing Steel through the contact information published on:
https://tucsonreinforcingsteel.com
© 2026 Tucson Reinforcing Steel. All rights reserved.
Scroll to read all 19 sections.
Laps are added once for each point where a run is longer than one stock bar. Change this number to match the bar length you plan to use. A run shorter than this gets no lap.
Part A: Linear Footage
Total LF is length times quantity. Laps and hooks are added only when you set them. Sizes #14, #18 and square bars use mechanical splices, so no lap is added.
| Location / Drawing Detail | LengthLF | Quantity | Total LF | Bar Size | Lbs / LF | Lap Method | Lap Valuediameters or inches | Lap Factor % | Number of Hooks | Hook Lengthinches | Total Lbs | Notes | Remove |
|---|
Part B: Area Based
For the most accurate result, enter both length and width. Bars then run along the length and are spaced across the width, with two-way adding bars the other direction. Spacing is treated as the maximum your plans allow, so the number of spaces is rounded up. With area only, the result is an approximation and is labeled that way.
| Location / Drawing Detail | AreaSF, if no dimensions | Lengthft, optional | Widthft, optional | Quantityidentical areas | Spacinginches on center | Edge Offsetinches | Bar Size | Lbs / LF | Direction | Lap Method | Lap Valuediameters or inches | Number of Hooks | Hook Lengthinches | Estimated LF | Total Lbs | Notes | Remove |
|---|
Rebar Estimate Summary
Part A total linear feet
0.0LF
Part A total weight
0.0lbs
Part B estimated linear feet
0.0LF
Part B total weight
0.0lbs
Combined total weight
0.0lbs
Combined total, US short tons
0.000tons
This is an estimate for reference only and is not a price quotation. Final quantities depend on your drawings, splices, waste and the engineer's requirements.
Calculator Disclaimer
The Tucson Reinforcing Steel Rebar Calculator is provided for preliminary estimating purposes only. Calculated quantities and weights are estimates and may differ from actual project requirements. Users are responsible for independently verifying all calculations, lap splice lengths, hook dimensions, material quantities, and applicable specifications against approved construction documents. The Calculator does not provide professional engineering services or guarantee the accuracy of results. Use is subject to our Calculator Terms of Use.
How the Calculator Works
Bar weights are nominal U.S. values in pounds per linear foot. Every result is an estimate, and you should check it against your drawings.
| Item | How it is calculated |
|---|---|
| Total LF (Part A) | Length times quantity |
| Laps | Splices per run (run length divided by stock bar length, rounded up, minus one) times lap length times quantity. Lap length is the bar diameters you enter times the bar diameter, or the inches you enter. No lap is added unless you choose a method. |
| Hooks | Number of hooks times hook inches divided by 12, added to the total feet |
| Weight | Adjusted linear feet times pounds per linear foot |
| Part B from dimensions | Bar count is the usable width divided by the maximum spacing, rounded up, plus one, so the actual spacing is never wider than the maximum you enter. Each bar runs the length minus the edge offsets. Two-way adds the same calculation in the other direction. |
| Part B from area only | Area times 12 divided by spacing, doubled for two-way. This is an approximation. |
| Tons | Pounds divided by 2,000 (U.S. short tons) |
Request a Rebar Quote With Your Calculation
Your calculator results are added to this request automatically. We review them with your drawings and return a written quote. The calculator estimate is not a quotation.